Decontamination is a very tricky business - particularly with mold which is classified as a lung irritant. If you did not take any precautions before you played the tapes you will now have the high concentrations of mold all over the place - particularly if you used ff or rewind. Depending on the machine it could really be distributed inside the transport. Depending on how bad it is I would recommend different procedures. Unless these are very valuable machines, it may be better to start with new machines and toss the old. If these are studers or something very valuable, you will have to put them in a different environment, use vacuum systems (high power) to try to remove the mold, alcohol, respirators and gloves for the people doing the work.;....... it is a project....
BEGIN:VCARD VERSION:2.1 N:Lindner;James FN:James Lindner ORG:Media Matters, LLC. TITLE:Managing Partner TEL;WORK;VOICE:+1 (212) 982-4413 TEL;WORK;FAX:+1 (212) 982-4413 ADR;HOME:;;15 Washington Place, Suite 2M;New York;N.Y.;10003;United States of America LABEL;HOME;ENCODING=QUOTED-PRINTABLE:15 Washington Place, Suite 2M=0D=0ANew York, N.Y. 10003=0D=0AUnited States o= f America URL: URL:http://www.media-matters.net EMAIL;PREF;INTERNET:jim@xxxxxxxxxxxxxxxxx REV:20011009T234721Z END:VCARD