[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] ELBERG MD12
To null it out, you'd need a "vertical" switch. Looking at the peak on a
meter in lateral mode is not nearly as precise.
As someone pointed out, they charge more for this option- about $ 2-300 as I
----- Original Message -----
From: "David S Sager" <dsag@xxxxxxx>
Sent: Monday, June 09, 2003 10:22 AM
Subject: Re: [ARSCLIST] ELBERG MD12
> Can anyone attest to the balance control on this unit? Does it pan
> accross the groove walls so that you can null out the signal or is it
> just a standard blance control?
> >>> smolians@xxxxxxxxx 06/08/03 07:04PM >>>
> With lateral mono records, the purpose of the vertical switch and
> control is to null out the signals, thus assuring that when they are
> switched to lateral, they will be in balance.
> I feel strongly that this tool is so essential to all 78 preamps of
> manufacure that it should be included in the basic configuration, not
> as an
> Steven Smolian
> ----- Original Message -----
> From: "francesco martinelli" <fmartinelli@xxxxxx>
> To: <ARSCLIST@xxxxxxxxxxxx>
> Sent: Saturday, June 07, 2003 12:10 AM
> Subject: Re: [ARSCLIST] ELBERG MD12
> > We do have it and currently use it at the Siena Jazz Archive. It has
> > good quality that we're using it also as a phono pre, bypassing our
> > integrated amplifier.
> > It takes a bit of experimentation to use the presets, but even using
> it in
> > the flat position the end results are excellent on the safety copies
> > the loudspeaker when I invite students to listen to original 78.
> > It doesn't have a vertical swith but does have an useful balance
> > As an all-in-one solution, compact and with excellent sound, cannot
> > anything better.
> > Francesco
> > ----- Original Message -----
> > From: "David S Sager" <dsag@xxxxxxx>
> > To: <ARSCLIST@xxxxxxxxxxxx>
> > Sent: Friday, June 06, 2003 8:56 PM
> > Subject: [ARSCLIST] ELBERG MD12
> > > Has anyone out there had experience with the ELBERG MD12 Multicurve
> > > preamp? If so, any comments?
> > >
> > > Thanks
> > >
> > > David Sager