[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] oscilloscope
While I own five Tektronix oscilloscopes, I need to ask what you're going to use
Other than a lissajous (sp?) pattern for azimuth alignment of
two-or-more-channel playback, I rarely use an oscilloscope.
What I use the most are the built-in meters and an Magnetic Reference Lab test
I also use software "scopes" for looking at phase. Before I got a 2GHz computer,
I really liked the Tek 465M for that purpose as it doesn't have a fan, but most
of these are pretty beat up.
Any Tek lab scope that has an XY input is good for azimuth setting, but, with
white/pink noise you can do about as well with your ears as you can with tones
on the scope. Invariably there is some cyclic variation in the azimuth and you
need to "peak" it with the scope.
If you're not going to run it all the time while mixing, the 465 is a good
I have a 453 that is dead-on after all these years
a 466 storage scope
a 485 lab scope.
All are good.
There is an interesting site aiming at the older Tek scopes
These are all getting old. The newer 2200 series are good, but I only had one
and returned it as it was not in good shape as advertised.
Richard L. Hess
Quoting "Peoples, Curtis" <curtis.peoples@xxxxxxx>:
> Can anyone reccommend a good oscilloscope for calibrating tape machines
> that is not too expensive. I have been looking at some Tektronix scopes
> on ebay, but did not know which model would be the best
> Curtis Peoples
> PO Box 41041
> Texas Tech University
> Southwest Collections Special Collections Library
> Lubbock, Texas 79409-1041
> Phone: 806-742-3749 ext 265
> Fax: 806-742-0496
> www.swco.ttu.edu <http://www.swco.ttu.edu/>