[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] Copying LP covers
No. I came across this while surfing B&H. To shoot flat art I use the
procedure described earlier.
----- Original Message -----
From: "Richard L. Hess" <arclists@xxxxxxxxxxxxxxx>
Sent: February 07, 2006 11:09 AM
Subject: Re: [ARSCLIST] Copying LP covers
At 03:45 PM 2/7/2006, David Lewiston wrote:
If the other solutions aren't suitable, take a look at this Testrite Copy
David, do you have one of these? I do and the arm is very prone to
vibration. The lights are OK, but the arm needs more
reinforcement...someday. It's just a flat piece of steel, no angle or rib
or anything. Think TWANG.....at least on the one I have.