[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[ARSCLIST] mold questions
I'm currently going through several boxes of reel to reel tapes (some
acetate, some polyester) that may have been exposed to mold. There
was a water leak where they were stored, and some of the boxes got
slightly wet, so we're checking them to see if they're okay or not.
So far, I've only seen mold on one of the boxes (the tape box, that
is, not the larger cardboard box holding all of the tapes), and some
of that got onto the outer layer of tape. The other tapes appear to
be somewhat dirty and poorly packed in some cases, but as far as I can
tell, no mold. I've been using a small brush to gently dust off what
I've been finding, and my assumption is that if it brushes off easily,
it's just dust, and mold would adhere more stubbornly.
Am I right about this? It's been a couple of years since I've seen
truly moldy tapes, so I want to make sure I'm not overlooking
something. If I look at these under a microscope, what magnification
do I need to use in order to see actual spores (if they're there)?
It's a little difficult going through these because it's apparent that
prior to two or three years ago, these tapes were not stored in ideal
conditions. (Which of course means they might have mold on them from
years ago and not this recent water incident.)
Emory University Libraries