[Table of Contents]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


You can even use a
mic preamp if you can bypass the 600-ohm input transformer, or more appropriately replace it with something where the cartridge sees 47K-ohms

Which gets back to the KAB pre-amp, which can provide 47k ohms for the phono cartridge, and variable for different loads.

I am not familiar enough with
the Packburn to know if it has a low-level output to directly feed a phono preamp with EQ.

taking a line level signal and dropping it to cartridge level for feeding into a phono pre-amp should be quite easy.

joe salerno

[Subject index] [Index for current month] [Table of Contents]