[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] 1937 shellac test pressing outperforms audio CD
The Stanton 681 is still made, now the EEE version:
-- Tom Fine
----- Original Message -----
From: "Richard L. Hess" <arclists@xxxxxxxxxxxxxxx>
Sent: Friday, April 03, 2009 12:34 PM
Subject: Re: [ARSCLIST] 1937 shellac test pressing outperforms audio CD
At 11:12 AM 2009-04-03, Eric Jacobs wrote:
On Thursday, April 02, 2009 11:10 AM, Michael Biel wrote:
> But they could be harmonic ringing of the mechanics of the cutter
> head--the other mechanical device in the chain. You have to
> consider the source feeding the recording head--the microphones
> and amplifiers.
Indeed! I'm hitting the drawing board looking for a ringing coil
somewhere (mic, cutter, or cartridge). Time for me to double check
*everything*. I've heard that the Westrex cutters were more prone
to ringing than the Neumanns, but I don't know what cutters were in
use at RCA in 1937.
My first summer job in audio was 1971 in the audio design lab at
Fisher Radio when they were still in Long Island City, NY.
I had been using Stanton 681 EE cartridges for a while (and still use
them for my personal listening as I don't do professional transfers
of grooved media). The lead engineer in the lab showed me his scope
photos from a CBS test record which clearly showed ringing on the
Stanton and none on a Shure M91ED which he gave me to try. I thought
it sounded dull...but his scope photos couldn't lie...it was obvious
that the Stanton was adding something!
A few years later, someone -- I think it was published in audio --
had taken a scanning electron microscope to these very same CBS test
records and, low and behold, there was RINGING recorded in the
grooves! I wish I could find that article again!
I went back to the Stanton, feeling far more justified that I was
listening to what was cut into the grooves -- whether it was supposed
to be there or not. Using a cartridge that didn't show the ringing
was like "wearing rubber gloves for leaky fountain pens" as another
one of my mentors, the late Hans Schmid of ABC used to say.
I'll go back to tape now and let the others in this thread use this
information as they see fit (or not). I hope it was marginally
useful, but you all probably knew this anyway.
Richard L. Hess email: richard@xxxxxxxxxxxxxxx
Aurora, Ontario, Canada (905) 713 6733 1-877-TAPE-FIX
Detailed contact information: http://www.richardhess.com/tape/contact.htm
Quality tape transfers -- even from hard-to-play tapes.