[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] Robert Johnson RPM debate
Vocalion probably used a spring driven cutter, and they were
less reliable than the weight driven ones (according to Ralph
Peer). If we knew Johnson tuned his guitar perfectly (re:
'A' 440), it would be a piece of cake. He probably didn't,
but still it was probably not too far off, especially if he
played with other musicians (e.g., harmonicas).
Date: Mon, 25 May 2009 11:18:13 -1000
From: Malcolm Rockwell <malcolm@xxxxxxxxxx>
Subject: Re: Robert Johnson RPM debate
I've read the arguments and heard the pitch shifted samples and say
possible the recordings are pitched high. This would mean one of three
things: 1) Robert really sang that way; 2) the material was
slow; and/or 3) the final pitch was modified by dubbing prior to
I tend to go with #1, mostly because I've always heard him the way he
has been presented on LPs and CDs and my ear is used to that. The
samples are interesting food for thought, though!
#2 is possible mostly because machines do run slow (there's very
homogenity of 78rpm recording speeds company to company, and
session within the same company. Add that to playback speed variations
and, well...). What was the power source in Dallas? 110 VAC? 120
was it DC voltage? If AC, was the frequency (usually 60 Hz) solid, or
did it wander? What kind of motor did the portable recording lathe
use... AC, DC or counter-weighted (mechanical)? There are just too
#3 requires forethought and since there was seemingly so little of
#2, I doubt this scenario. Producers are not going to agonize about
kind of thing; to them Robert was just another blues picker. But who
knew what he'd become 60 years later or that any of this would matter?
Good luck with your research!
james mendenhall wrote:
I am doing research about the rpm debate of the Robert Johnson
Does anyone have any information for me?
And, is this all speculation or has there been proof found that they
are indeed too fast?