[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Tipping in correction pages (help!)
- To: Multiple recipients of list BOOK_ARTS-L <BOOK_ARTS-L@xxxxxxxxxxxxxxxx>
- Subject: Re: Tipping in correction pages (help!)
- From: "Jack C. Thompson" <tcl@xxxxxxxxxxxx>
- Date: Fri, 27 Sep 1996 15:49:48 -0800
- Message-id: <199609281038.DAA19084@SUL-Server-2.Stanford.EDU>
- Sender: "The Book Arts: binding, typography, collecting" <BOOK_ARTS-L@xxxxxxxxxxxxxxxx>
>This is a somewhat urgent message ...
>The printer thinks he might be able to cut out the page and tip in a new
>one with the same professional hot glue...
>Would it be possible for me to tip in a single page using some other type
>of >glue, PVA or something....
Yes, you can do this. A PVA, such as Jade 403, will work. One technique is
Draw a line of PVA on a piece of glass or formica a bit longer than the
page you are tipping on; take the new page in hand and touch the inner edge
to the adhesive; then lay the new page into place, having torn the old page
Close the book and move on to the next book. If you take too much adhesive
up there will be problems on opening the book; the least possible amount of
adhesive is best.
Jack C. Thompson
Thompson Conservation Laboratory
7549 N. Fenwick
Portland, OR 97217