[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Before I start a fire. . . MYLAR
- To: BOOK_ARTS-L@xxxxxxxxxxxxxxxx
- Subject: Re: Before I start a fire. . . MYLAR
- From: R Starr <rstarr@xxxxxxxxxxxxxx>
- Date: Thu, 15 May 1997 09:51:57 -0500
- In-reply-to: <01IIV0O523B600CKKV@UMBC2.UMBC.EDU>
- Message-id: <199705151352.GAA19290@SUL-Server-2.Stanford.EDU>
- Sender: "The Book Arts: binding, typography, collecting" <BOOK_ARTS-L@xxxxxxxxxxxxxxxx>
I have used the mirror surfaced mylar? (mirroplex?) in my printer. The
only problem is that the surface is so shiny that the feed wheels on the
printer leave marks on the film.
You might want to contact HP about the fusing temperature of your printer
and then set an iron at the right temperature and test it on the compound
you want to copy onto.