[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Drills for 4-hole stab bindings
- To: BOOK_ARTS-L@xxxxxxxxxxxxxxxx
- Subject: Re: Drills for 4-hole stab bindings
- From: "Virginia B. Sauer" <vsauer@xxxxxxxx>
- Date: Tue, 2 Sep 1997 09:13:21 EDT
- Message-id: <199709021315.GAA28350@SUL-Server-2.Stanford.EDU>
- Sender: "The Book Arts: binding, typography, collecting" <BOOK_ARTS-L@xxxxxxxxxxxxxxxx>
"Peter D. Verheyen" <pdverhey@xxxxxxxxxxxxxx> wrote:
>> I suppose you could always try to fit your holepunch size
of choice into a Dremel or drill press. The hole punches
should fit into a Dremel chuck. I know they'll work in a
regular drill. Should work, though you might have to
empty it out on occasion. You also won't be able to drill
through too many leaves / sections either due to the short
length and shape of the punch. Just make sure it's sharp.
Thank you very much. For someone whose only contact with a
drill was in the dentist's chair, could you please elaborate
a little on the terms (such as "chuck", or the difference
between a Dremel and a drill press)?
Thanks again. I really appreciate it.