[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Aluminum


I don't know anything about die cuts and stamping, but am interested in
finding out!

However, I cut out my copper etching plates with a jeweler's saw and a very
fine blade, then use a very fine file to round off the sharp edges. Perhaps
this would work in cutting out your aluminum too?

Good luck,

Jane Conneen
Web: http://members.aol.com/Lfarmpress

[Subject index] [Index for current month] [Table of Contents] [Search]