[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- To: BOOK_ARTS-L@xxxxxxxxxxxxxxxx
- Subject: please remove
- From: AGI Design <agi@xxxxxxxxxxxxx>
- Date: Wed, 30 Dec 1998 08:51:53 -0500
- Message-id: <199812301401.GAA18696@palimpsest.Stanford.EDU>
- Sender: "Book_Arts-L: READ THE FAQ at http://www.dreamscape.com/pdverhey" <BOOK_ARTS-L@xxxxxxxxxxxxxxxx>
From: Lavinia Adler <laviniaa@xxxxxxxx>
To: BOOK_ARTS-L@xxxxxxxxxxxxxxxx <BOOK_ARTS-L@xxxxxxxxxxxxxxxx>
Date: Tuesday, December 29, 1998 10:11 PM
Subject: Re: Dremel or drill?
>Hi, Artemis. My Dremel drill bit seems to slide away from where I want it
>also, so I've taken to making a small indentation with an awl where I
>want the hole to be. I place the drill bit on that indentation and it
>doesn't slide or jump away on me.
>On Mon, 28 Dec 1998 09:30:28 -0800 Artemis BonaDea <paradux@xxxxxxxxxx>
>>When purchasing a Dremel (or other brand) system, consider a one
>>speed drill with a foot pedal. The tools that have five speeds with
>>an adjustable button on the handle are not near as versatile as you
>>have to move your hand to change speed and the speeds are set. The
>>pedal lets you choose a variety of speeds with your foot while both
>>are where you want them.
>>I tried a drill press attachment for the Dremel tool but the holes I
>>was able to drill were not straight, the bit seemed to vere off at an
>>angle when it contacted the paper. Perhaps this was a problem with
>>bit and not the drill press? Any personal experience on this?