[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Laser Printing (was: bookbinding - present and future)
- To: BOOK_ARTS-L@LISTSERV.SYR.EDU
- Subject: Re: Laser Printing (was: bookbinding - present and future)
- From: Jane M Brown <brownjm@MUSC.EDU>
- Date: Wed, 10 Feb 1999 16:03:54 -0400
- Message-Id: <199902102106.NAA16250@palimpsest.Stanford.EDU>
- Sender: "Book_Arts-L: READ THE FAQ at http://www.dreamscape.com/pdverhey" <BOOK_ARTS-L@LISTSERV.SYR.EDU>
My thinking would be that the talcum powder, which probably has a corn
starch base, is less damaging permanently than the transfer of the PVC from
the vinyl notebook (basing my statement on the recent experience of trying
a vinyl notebook from a presentation folder after the two had fused from
storage next to each other over a period of years (length of time unknown).
The presentation folder is still sticky after over a week of separation.
--On WedTu, Feb41022199997 9:22 AM -0800 "Laura Boston"
> I have had the problem with photocopied images...and storing either =
> photocopies or laser-printed copies in vinyl binders is a nightmare; the =
> (excess) toner sticks to the vinyl and pulls off the image. I know =
> theoretically, the toner in both cases is fused to the paper, so I can't =
> explain WHY it pulls off, but it does. I always put blank sheets of paper
> in between any photocopied or laserprinted image that I want to keep for =
> that reason. It's a waste of paper, but it keeps the image intact. =
> Dusting with talcum powder also seems to help, temporarily, but I don't =
> know what effect the powder has on the paper long-term. I imagine that it
> could be quite damaging.
> Laura Boston
> Penrose Memorial Library
> Whitman College
> Walla Walla, WA 99362
>>>> "Gray, Lyle" <Lyle@QUODATA.COM> 02/10 9:01 AM >>>
> I have experienced problems with books printed with laser printers. If =
> book gets warm, the print may stick the pages together.
> Has anyone else experienced that problem?
> Lyle H. Gray
> lyle @ quodata . com inceptum perage
>> -----Original Message-----
>> From: DT Fletcher [SMTP:FletcherOR@AOL.COM]=20
>> Sent: Wednesday, February 10, 1999 11:51 AM
>> To: BOOK_ARTS-L@LISTSERV.SYR.EDU=20
>> Subject: Re: bookbinding - present and future
>> In a message dated 2/10/99 7:20:59 AM Pacific Standard Time,
>> hollands@PRIMEX.CO.UK writes:
>> << Does anyone have any thoughts about this, especially
>> how do they envisage the future of bookbinding.
>> Kate Holland >>
>> It's just one perspective, but the modern Unibind thermal binding system
>> combined with modern inexpensive duplexing laser printers brings
>> hardbound binding within reach of almost anyone and may fortell the =
>> where almost anyone can print and bind their own book for a relatively
>> dt fletcher