[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Drilling holes through a bookblock

Suhag--There are special drill bits for drilling paper.  They are available
from printers' supply companies.  Perhaps you local printer can lend you one.


At 04:29 PM 5/28/99 EDT, you wrote:
>What's the best way to drill quarter inch wide holes through a bookblock?
>(for post-&-nut binding). I am using a 1/4 inch wood bit and a manual drill,
>using C-clamps to hold the bookblock in place. Of course the holes are never
>perfect. Also it takes a long long time to drill each hole. What am I doing
>Thanks all,
Sam Lanham (slanham@hctc.net)

[Subject index] [Index for current month] [Table of Contents] [Search]