[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: simulate fluxus work?

This does work very well on some copiers. It's very helpful to use =
foamcore for a backing. I think it's the smooth surface and the fact that =
it gives a little bit.

>>> RLavadour <paper@OREGONTRAIL.NET> - 6/9/99 2:45 PM >>>
>When I did some transfers in a class a few years ago, we used alcohol, I
>think--the kind you get in the pharmacy, not the liquor store. You could
>probably also use nail polish remover, although that has additives that
>you may not want.
>Betty Steckman

I recently purchased a handy tool for transfering color or black and white
xerox copies from Dick Blick. It is shaped like a soldering iron but with =
round disc at the end that gets *really* hot. You just rub it along the =
of the photocopy - it takes a little practice to apply enough heat to
transfer, but not so much you burn the paper. Results seem to be comperable=

to solvent transfers I've done in the past. Takes a little patience, (the
disc is only about the size of a nickle, and you have to move it slowly) =
there are none of the problems associated with using solvents.

(sorry if this comes through with huge type, I'm having a little font
problem with my program...)

[Subject index] [Index for current month] [Table of Contents] [Search]