[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: non-glare glass

Another list member may be able to discuss this particular to documents, but
I do work with some anti-glare technologies.
It would probably depend on the type of anti-glare glass. Many of them are
coated with a film on one side only (usually the outside) which is chemically
or thermally bonded to the glass.
On the other hand certain types are made with the anti-glare materials
sandwiched in between the glass substrates. The key would be to determine the
specifics of the product you want to use.

As a starting point I would recommend checking out:

Information Specialist

Mark Arend wrote:

> I vaguely remember hearing somewhere that, when framing documents,
> non-glare glass should not be used because there might be some
> contamination from the chemicals which make the glass non-glare.  Anyone
> else heard anything like this?
> Of course, I do know to mat the item so there is an air space and it does
> not physically touch the glass.
> Thanks.
> Mark W. Arend, Scoutmaster
> Troop 736
> Beaver Dam, Wisc.

[Subject index] [Index for current month] [Table of Contents] [Search]