[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Round corners

In a message dated 6/26/01 11:36:57 AM, TradeBind@AOL.COM writes:

<< Anybody have a suggestion or trick for doing a rounded corner on a board to
be covered with paper (or cloth). On a square board I cut the paper (or
cloth) at a 45
angle out from the depth of the board. But with a rounded corner that isn't
working. Thanks for any thoughts. >>

There is a Corner Rounder made by LASSCO Products in Rochester, NY, phone
716-235-1991. It is available with various radi from 1/8 inch to 1/2 inch.
Some book and paper conservation suppliers and printing suppliers carry them.
They are over $100.
Otherwise, you could use a wooodworkers gouge or even finger nail clippers.
Bill Minter

            BOOK_ARTS-L: The listserv for all the book arts.
      For subscription information, the Archive, and other related
            resources and links go to the Book_Arts-L FAQ at:

                          To unsubscribe send:
                            UNSUB Book_Arts-L
                           ALL COMMANDS GO TO:

[Subject index] [Index for current month] [Table of Contents] [Search]