[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BKARTS] Tool for impressing a monogram

If you are thinking of a hand tool, I would contact P&S Engraving
<http://www.pandsengraving.co.uk/> in the UK. Very nice work in brass, and
quite reasonable. If you plan to use this in a stamping Press, I would
contact Owosso Graphic Arts <http://www.owossographic.com/index2.htm>.
These are zinc or magnesium dies. Make sure you specify "type high."

In terms of help with rendering ask them, or find someone local to work
with and then send them the artwork.


At 09:38 PM 2/2/2003 -0500, you wrote:
I would like to have a small tool made (cast?) with which to impress
a monogram on leather bindings, and have no idea where to ask for
this to be done. Chapter Two is that I will also have to ask for
design assistance. I can sketch the single flowing line that I want,
but am not a good enough calligrapher to be able to render a perfect

Larry Preuss
Ann Arbor, MI


Peter D. Verheyen
Bookbinder & Conservator
The Book Arts Web & Book_Arts-L Listserv

           BOOK_ARTS-L: The listserv for all the book arts.
     For subscription information, the Archive, and other related
           resources and links go to the Book_Arts-L FAQ at:

       Archive maintained and suppported by Conservation OnLine

[Subject index] [Index for current month] [Table of Contents] [Search]