[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BKARTS] J-D Finishing Press.

On Jan 15, 2004, at 11:10 PM, Carol Pratt wrote:

Hi Carol,

It is good to hear from you.

The unit cost $ 550.00 plus shipping.

The jaws are made of 13 layer birch ply wood.  The press will swivel
even more than my press,
the Leo. and when not needed swings down below a bench.
The unit stands about 15 inch above the bench and the jaws are 14
inches long and eight
and a half inches deep They will open five and a half inches wide.

If you have any more question please contact me.
Thank you for your interest,

Fred A Jordan
4380 C, R. 37
Livonia N. Y. 14487


       See the Book_Arts-L FAQ at: <http://www.philobiblon.com>

    *Postings may not be re-printed in any form without the express
    consent of the author - Please respect their contributions & ©*

       Archive maintained and suppported by Conservation OnLine

[Subject index] [Index for current month] [Table of Contents] [Search]