[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BKARTS] Un-warping foamcore board


Review Peter's recent post on the clean pasting thread and in the
archives on similar topics. He discusses most clearly the need to
balance stresses on boards (and the role of experience with your
materials). In short, if pasting on one side curled the board, paste on
the other side to balance it.

Don Drake
Dreaming Mind

IM: stitchbyhand
(510) 537-9711

caused all the corner areas to curve
upwards; is there anything that can be done to straighten this out? I
wondered if it might be helpful to perhaps glue something to the back
June-Etta Chenard

*********************************************** See the Book_Arts-L FAQ at: <http://www.philobiblon.com>

    *Postings may not be re-printed in any form without the express
    consent of the author - Please respect their contributions & ©*

       Archive maintained and suppported by Conservation OnLine

[Subject index] [Index for current month] [Table of Contents] [Search]