[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BKARTS] Un-warping foamcore board


When paper or boards are mounted and one sheet is thinner than the other, the
thinner sheet always draws the thicker.  With that in mind. it is best to be
prepared to compensate for draw ahead of time. There is a very good chance
that if you mount a sheet of equal thickness on the oposite side and let it dry
flat, that it will correct the bow that you have in your foam-core board.


Ed S.

        See the Book_Arts-L FAQ at: <http://www.philobiblon.com>

     *Postings may not be re-printed in any form without the express
     consent of the author - Please respect their contributions & ©*

        Archive maintained and suppported by Conservation OnLine

[Subject index] [Index for current month] [Table of Contents] [Search]