[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BKARTS] Punching 7/32 in holes

Yes.  The posts are made for the ease of putting in new pages AND removing pages. I you need to remove one sheet from the middle without tearing it and they are as tight as you want them it would be quite a struggle. Especially since they are usually loaded with pictures or other attachments which tend to make the sheets flex as they are removed.
That is why they are normally punched or drilled with 1/4 inch holes.

At 12:36 PM 2/13/04 -0600, Scott Witte wrote:
> Or am I making too much out of
>hole size?

David Allen
Beddall Bookbinding Conservation & Restoration
840 Snowdrop Avenue
Victoria, British Columbia
(250) 888-9380

Violence can only be concealed by a lie, and the lie can only
be maintained by violence. Any man who has once proclaimed
violence as his method is inevitably forced to take the lie
as his principle.
  Aleksandr Isayevich Solzhenitsyn   - Nobel Prize lecture, 1974

        See the Book_Arts-L FAQ at: <http://www.philobiblon.com>

     *Postings may not be re-printed in any form without the express
     consent of the author - Please respect their contributions & ©*

        Archive maintained and suppported by Conservation OnLine

[Subject index] [Index for current month] [Table of Contents] [Search]