[Table of Contents] [Search]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BKARTS] Bookbinder's Hammer Question, Addenda

I'd like to add that my personal preference is for a cobbler's hammer  on
which the face is parallel to the handle. It will greatly reduce the stress  on
your wrist and improve your accuracy to not be tilting the hammer as you  work.
These will be lighter in weight than a German hammer but still have the
extended neck and longer curved claw shank which are very desirable. The  sizes of
the face and claw usually fall in between English and German  hammers.
Because one almost never backs a joint to 90 degrees there is no real  need for
great weight in a backing hammer or any real force in the  operation.
Personally I find the design the most elegant.
There is the added advantage that old cobbler's hammers of this design  are
quite common and inexpensive on the used market and appear regularly on  eBay.
I would suggest that you file the face and claw smooth if necessary (you  may
also wish to soewhat thin and flatten the curved working edge of the  claw)
and then have the hammer head chrome plated.
Best, James

     The Bonefolder: an e-journal for the bookbinder and book artist

             For all your subscription questions, go to the
                      Book_Arts-L FAQ and Archive.

                  Both at: <http://www.philobiblon.com>

[Subject index] [Index for current month] [Table of Contents] [Search]