Hello all,
I am hopeful that someone might have insight concerning several issues:
First, I need to print on both the back and front of a single sheet of
paper. I don't mind the fact that there is no a duplicator for my
machine and will have to flip the pages over to print on the rear side.
I do mind that the machine does not hold strict tolerances when printing
sheet to sheet and from back to front. The booklets that I wish to print
are 5.5 square with margins of 3/4''. Any slippage really shows. Is
there any method of assuring accuracy or registration on both sides?
Alternately, if I take this to a professional printer, will a place like
Kinko's register accurately? Is laser printing really poor for a good
artist book? Or should I go to off-set. And if off-set, will they use
paper that I have precut? The last question I can ask my off-set company
with whom I work for business. There are 240 booklets with 24 pages per
book.
I appreciate any advice you can give - thank you, A.
***********************************************
The Bonefolder, Vol 2, No 2, Spring 2006 Now Online at
<http://www.philobiblon.com/bonefolder/vol2no2contents.htm>
Flag Book Bind-O-Rama and Exhibit
Entry Deadline, September 15, 2006
For all your subscription questions, go to the
Book_Arts-L FAQ and Archive.
See <http://www.philobiblon.com> for full information
***********************************************