[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [BKARTS] To Hollow or Not To Hollow
On Oct 25, 2006, at 5:01 PM, roroberts@xxxxxxxx wrote:
Either one. I used a hollow today on a cloth book to position the
restored case for tucking in new linen joints. And frequently use
hollows on more modern leatherbound books.
******************************
This list certainly brings about some wonderful/informative discussions
that could hardly be done anywhere else, especially so widely.
As I ponder the various comments on this topic, I would like to share
one alternative to the above: Many years ago, Jeri Davis gave a
presentation at the GBW Standards conference on cloth rebacking. As
always, there was something for everyone. One major tip/technique that
she shared could be used to replace the hollow that was needed in the
above treatment.
Jeri showed us how she (lightly) adheres the textblock to the rebacked
cover by running a small amount of adhesive (PVA) along the top of the
shoulder (both front and back of the book). Upon inserting the
textblock and setting the squares, and then placing the book under a
weight, the two components are perfectly aligned. Since the textblock
is now somewhat secure, it will allow inserting the new cloth hinge
under the original endsheets.
IN FACT, I use this same technique for casing-in new books, and it is
especially good for students --- the tipping-in technique certainly
saves on the frustration of misaligned endsheets.
Bill Minter
William Minter Bookbinding & Conservation, Inc.
4364 Woodbury Pike
Woodbury, PA 16695
814-793-4020
Fax: 814-793-4045
Email: wminter@xxxxxxxxxxxxxx
***********************************************
Guild of Book Workers' 100th Anniversary Exhibition Now Online - Catalog Available
<http://palimpsest.stanford.edu/byorg/gbw/gallery/100anniversary/>
For all your subscription questions, go to the
Book_Arts-L FAQ and Archive.
See <http://www.philobiblon.com> for full information
***********************************************