[BKARTS] Paper Cutters for Sale

[Charles Kroon <ginkgo@xxxxxxxxxxxxxx>]

Three paper Cutters & Plate Oil For Sale

I have 3 paper cutters I no longer need. They are for sale but they  
have to be picked up at my studio in Chicago. I'm just not able to  
ship them. They are:

1) Premier 16 inch paper cutter. Metal base, hold down bar. It is in  
very good condition. $20.

2) Precise Trimming Board #6. This has a wood base, the grid markings  
are a bit worn but still readable. It has an 18 inch blade. I have a  
second one identical to it that I have been cutting metal, and paper  
for the past 25 years and it still is as sharp as new. These are  
really tough cutters. $20

3) Ingento 40 inch paper cutter. Floor model, it can also be used  
without the legs on any large flat surface. The base is 30 inches wide  
and the blade is about 40 inches long. All wood construction. It is an  
older model, very similar to the current models which sell for about  
$600-800. The blade needs sharpening. It has a foot operated hold down  
that needs to be screwed into the floor. $200.

4) One gallon of Gamblin Plate Oil #000. $5

I've taken pictures of them and they can be seen at:

www.accumulata.com/pics/cutters.jpg

The small Ingento picture is of a similar current model to show what  
it looks like assembled. The one for sale, the older one, did not have  
the board between the legs.

Again this is a pick up in Chicago.

Thanks,

Joycelyn Merchant
Charles Kroon

www.bookclasp.com
www.ginkgojewelry.com

773-989-2200
jmerchant@xxxxxxxxxxxxxx

            ***********************************************
          NOW ONLINE, The Bonefolder, Vol. 4, No. 2, 2008 at
                <http://www.philobiblon.com/bonefolder>
                                   
            For all your subscription questions, go to the
                     Book_Arts-L FAQ and Archive.
        See <http://www.philobiblon.com> for full information.
            ***********************************************