Conservation DistList Archives [Date] [Subject] [Author] [SEARCH]

Subject: Impressions from stamping dies

Impressions from stamping dies

From: Nicholas Yeager <artifex>
Date: Tuesday, December 1, 1998
Karen L. Pavelka <pavelka [at] mail__utexas__edu> writes

>Robert J. Milevski writes:
>>...(Stamping dies) I want to make sharp dark impressions
>>of these dies for scanning into a computer.
>...
>
>Would it be possible to photograph the dies in black and white under
>slightly raking light and then transfer the image to a scanner?

Most stamping dies will receive ink as if they were type. Set your
die on a printmaking press, ink up, and "print" your impression. If
you've got stock--wood or plastic, you can build it up to type-high
and run it through a proofing press. If you don't have a press at
all, use etching ink, a rolling pin or nipping press, cover the die
with old felt cloth, dampen your paper, and pull a proof. This will
give you an accurate, clean impression with just a little practice.

The problem with K. Pavelka's approach is that it's an inaccurate
way to get a degraded image, and will be further degraded when
scanned into your computer.

Nicholas G. Yeager
51 Warren St.#2
New York, NY 10007-212-346.9609

                                  ***
                  Conservation DistList Instance 12:49
                Distributed: Wednesday, December 2, 1998
                       Message Id: cdl-12-49-024
                                  ***
Received on Tuesday, 1 December, 1998

[Search all CoOL documents]


URL: http://cool.conservation-us.org/byform/mailing-lists/cdl/1998/1480.html
Timestamp: Wednesday, 05-Oct-2011 15:20:15 PDT
Retrieved: Tuesday, 17-Sep-2019 00:13:46 GMT